A plasma cutter is a type of metal-cutting object or machinery that uses the latest technology to cut metal. It gets super hot with the help of pressurised gas and then it smoothly cuts all types of metals very easily.
There are lots of features that you have to consider before buying a plasma cutter. product-related information helps you to select the best out of all. Otherwise, you will be very disappointed if you don’t make the right choice.
So here in this blog, you are going to know about the premium features of Plasma Cutter CUT50 and all those aspects that make Plasma Cutter CUT50 more valuable than others. This blog is going to be very informative in terms of welding and plasma cutting.
How Much a Plasma Cutter CUT50 Cost
The minimum investment that you can make in a plasma cutter is 150$ to $200 but this price may increase with the increase in other features and specifications. You may have to pay a few thousand dollars for it. But if you want the cheap one you can get it in reliable packages.
ARCCAPTAN provides a Plasma Cutter CUT50 that is actually worth buying due to its great features, it has dual voltage and it is also portable. You will get excellent performance. It will help you to complete your most demanding projects in no time.
Working of Plasma Cutter CUT50
Basically, the plasma energy is obtained by exposing the arc-generated power. This power is exposed to pressurised gas which is the cause of extreme heat. This heat is so intense and high that it can easily melt any metal easily without any hesitation. So this procedure is used for cutting metal. But it is safe to use due to its safety shields
A very high amount of heat is produced by a very small object to get better and clean cutting. is actually a very lightweight machine that provides an exclusive amount of power and performance to its users. There are lots of features that you can avail of from Plasma Cutter CUT50 and some of them are written below.
Technical Features
Large LED Display
The exclusive design of Plasma Cutter CUT50 contains a very clear large LED this large screen is really helpful for the worker because he doesn’t need to take off his helmet for reading. So this is actually a plus point for palms cutter customers.
Powerful Cutting
It has automatic dual voltage 110/220V. It has a very high-frequency arc starting mode that can cut through rough painted or rusty surfaces very easily and smoothly. It also had an advanced IGBT inverter technology that helped to cut ideally clean and clear.
Post FlowTIME
Once you stop cutting the fans start working and all the heat flows out of it to make it cooler easily and quickly. Its adjusted range is 5 to 15 seconds which can also be extended according to work. It is also suitable for long-term cutting as well,
Very Easy Setup
This plasma cutter contains a built-in regulator and gauge that help to get rid of pre-installation. It only needs 30 sec to start the whole process. Once you read the air pressure start working and cutting the most recommended pressure value is almost 40 to 70 PSI. Moreover, it is also portable.
Final Words
This was all about the best quality Plasma Cutter CUT50 from ARCCAPTAIN. Now you can buy this Plasma Cutter without any second thought because you are going to get great outcomes. Also, let me know if this blog was helpful for you to get basic information about Plasma Cutter.